Port Kembla NSW – December 2019 – The Cringila station’s pedestrian overpass required de-painting of the lead based coatings – Due to the short rail shut down requirements and access times traditional erection of scaffold and containment for sandblasting was not economical or practical – PLC was engaged to undertake the lead paint removal via…
Washington, D.C. USA– October 2017 – Over 1000 square feet section of the Jefferson Memorial has been cleaned using our unique circular scan laser systems. – Not only did the process successfully remove the biofilm it also proved to sterilise the surface reducing the build up of biofilm in future. – Test area is visible…
Brisbane, QLD – June 2019 – PLC removed rust and corrosion from multiple machines with this Brisbane based factory. – Due to the process not using any chemicals or media, the cleaning could be undertaken in situ with the factory remaining in operation. – Moving components and bearings were cleaned in situ.
Sydney, NSW – June 2018 – Ongoing – PLC has been using our unique laser cleaning technology to clean away years of carbon, biofilm and atmospheric pollution staining these heritage listed pylon’s. – The work is ongoing in the public domain, causing no interruption due to the lack of noise, chemicals or run off making…
New York, USA – May 2014 – 3500 Year Old Egyptian obelisk entirely laser cleaned by our partners CSOS Inc. – No media, chemicals, noise made this a viable option in such a public domain like central park NYC. – Scaffold around the monument allowed the team to systematically work from top to bottom for…
Bendigo, VIC – 25 July 2018 – 140 year old heritage home had a severe internal fire. – The fire caused high levels of carbon build up on the exterior brick work of the building. – The challenge was to restore the damage without removing over 140 years of atmospheric build up and growth. -…
Mudgee, NSW – March 2019 – Over 200sqm of carbon effected Rammed Earth restored. – Traditional chemicals and Ice Blasting methods where trialled by the client initially but were unsuccessful. – PLC’s team and equipment were mobilised to Mudgee NSW. – Over 5 days the building was thoroughly cleaned and restored with no damage to…
Lochinvar, NSW – December 2018 – An arsonist attack was taken out on the chapel causing extensive smoke and debris damage to the building and contents. – The original 14 stations of the cross were initially thought to be damaged beyond repair. – PLC’s experts undertook trials onsite and determined the appropriate laser setting to…
Moorabbin Airport, VIC – September 2019 – PLC transported their equipment to the client’s hangar for onsite coating removal. – Various coatings from different components such as helicopter skids and frame works were removed for the purpose of inspection and refurbishment. – Due to the non-abrasive process of the cleaning, this was the perfect treatment…
Braeside, VIC – August 2019 – With the ability to clean onsite in-situ or have the moulds delivered to our facility, we were successfully able to remove significant rubber build-up on these moulds. – The non-abrasive process ensured an even clean with no effect to the moulding process. – High value, complex moulds require absolute…